Home > Products > Pure Sine Wave Inverter > BZ power 150kw low frequecny isolation hybrid inverter with 3 phase 480VAC output

BZ power 150kw low frequecny isolation hybrid inverter with 3 phase 480VAC output

Brand : BZ or Bangzhao or OEM

Product origin : China

Delivery time : 10-15 working days

Supply capacity : 10000PCS/Year

China best supplier BZ power 150kw low frequecny isolation hybrid inverter with 3 phase 480VAC output


 PV Off-grid Solar Power System

PV Off-grid solar power generation system including solar panel array, solar charge controller, storage battery, Off-grid inverter, etc. In the sunshine, the solar panel convert the solar energy to DC power and charge the battery group by the charge controller. Then the off grid inverter convert the DC power into AC power for power supply the AC load.

邦照离网系统图-大逆变器.jpg


100-400V or 300-600V or 400-800V wide input for no battery stored system

无电池风和光系统副本BZP-150KW.jpg

Technical Features for BZ power 150kw low frequecny isolation hybrid inverter with 3 phase 480VAC output

1.Wide input voltage can work without battery and solar charge controller,save more cost and With MPPT wide voltage input function, maximum use of solar power(for no battery stored system)

2.Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.

3.  Intelligentized, modularized, simple structure design with powerful function.

4.  Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.

5. The output frequency can be setting via LCD panel, it’s very convenient for customer.

6. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.

7. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.

8.  Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.

9. Low Frequency isolation Transformer, which ensures that inverter has high efficiency.

10. High conversion efficiency, Max. Efficiency more94%,less no load.

11.Adopts black pure aluminum radiator, which confirms the best radiating performance.

12. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.

13. Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-400V or 300-600V or  300-800V.

IMG_0380.JPG


Details for BZ power 150kw low frequecny isolation hybrid inverter with 3 phase 480VAC output

Model

BZP-120KW

BZP-150KW

Isolation mode

Low Frequency Transformer

DC Input

Rated voltage (Vdc)

480V

Rated current(A)

250A

312.5A

AC Output

Rated output power

120KW

150KW

Output waveform

Pure Sine Wave

Rated Voltage

380VAC±3%

480VAC±3%

Phases

3 phase 4 wire

3 phase 4 wire

Rated current(A)

182A (phase current)

180A (phase current)

Frequency

50Hz or 60Hz

Rated output voltage range (V)

380/400/415/440VAC optional

Power Factor(PF)

1

Overload Ability

150%, 5 seconds

Efficiency

>93%

Waveform distortion rate (THD)

<3%(Linear load)

Dynamic Response (0 to 100% load)

5%,≤50ms

Display

LCD

Running mode

Working continuously

Electrical insulation properties

2000Vac, 1 Minute

Communication interface (optional)

RS485

Protection Function

Protection

Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.

Cooling method

Fan-cooled

Short-circuit protection

No automatic recovery, need to restart the machine

Working environment

Noise ( 1 meter)

≤50dB

Degree of protection

IP20(indoor)

Working Altitude(m)

≤2000

Working temperature

-25~+55℃

relative humidity

0~90%,non-condensing

Mechanical dimension

Depth* Width * Height

900x1100x1600mm

Weight (Kg)

700Kg

900Kg

For 150KW system Related products:

solar combiner box

PCB.jpg

solar pumping system inverter:

SPI-1.jpg

Solar system battery charge controller:

S-1.jpg

solar connectors:

SC.jpg

Solar Cables:

4mm -1.jpg


Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
Message